Using The Whisk - Rondell Rde-1303 Die Betriebsanweisung

•
To switch the unit on, press and hold down the button
(2). Set the required operation speed using the con-
trol knob (1). Use this operation mode for mixing liq-
uid products.
Tip: To mix the ingredients, slowly move the unit up and
down in circular motions. When mixing in a casserole
during cooking, first remove the casserole from the stove
to protect the unit from overheating.
•
If you press and hold down the button (3), the unit will
operate at maximum rotation speed. Use this opera-
tion mode for combined processing of liquid and hard
products.
Note:
– Products should be put into the bowl before the unit
is switched on.
– Before starting to chop/mix, we recommend to peel
fruit, remove inedible parts, such as stones, and cut
fruit into 2х2 cm cubes.
•
After you finish using the unit, take the power plug out
of the socket and remove the blender attachment (6),
pressing the lock buttons (5).
Attention!
– Do not remove the blender attachment (6) during
operation.
– To avoid damaging the blades, do not process too hard
products such as cereals, rice, spices, coffee beans,
ice, cheese, frozen food.
– If the products are difficult to process, add some liq-
uid into the bowl.

USING THE WHISK

Use the whisk attachment (8) only for beating cream or
egg whites, making biscuit dough or for mixing ready
desserts.
Warning: before assembling make sure that the pow-
er plug is not inserted into the mains socket.
•
Insert the whisk (8) into the gear (7) and press on it
until bumping.
•
Insert the whisk gear (7) into the motor unit (4) and
slightly press on it until the locks (5) clicking.
•
Make sure that the attachment is properly fixed.
•
Insert the power plug into the mains socket.
•
Sink the whisk (8) into the bowl with products.
•
Set the required operation speed using the control
knob (1).
•
To switch the unit on, press and hold down the button
(2). Use this operation mode for mixing liquid products.
•
If you press and hold down the button (3), the unit will
operate at maximum rotation speed.
•
After the use unplug the unit, remove the whisk (8) from
the gear (7) and detach the gear (7) from the motor unit
(4) by pressing on the locks (5).
Attention!
– Do not use the whisk (8) to make tight dough.
– Products for beating/mixing should be put into the
bowl before the unit is switched on.
USING THE MASH MAKING ATTACHMENT
Attention!
– Use the attachment (10) to make the mash from boiled
potatoes, carrot or other vegetables.
– To make mash, it is recommended to use mealy sorts
of potato.
– Do not immerse the mash making attachment into boil-
ing liquids, for example, when cooking soup.
– Do not use the attachment (10) for processing hard
products and products that haven't passed temperature
processing, because it can damage the attachment.
Warning: before assembling make sure that the pow-
er plug is not inserted into the mains socket.
•
Install the attachment (10) to the gear (9), and turn it
clockwise until bumping.
•
Insert the attachment gear (9) into the motor unit (4)
and slightly press on it until the locks (5) clicking.
•
Make sure that the attachment is properly fixed.
•
Insert the power plug into the mains socket.
•
Immerse the attachment (10) into the bowl with products.
•
Set the required operation speed using the control
knob (1).
•
To switch the unit on, press and hold down the button (2).
•
When the button (3) is pressed, the unit operates at
maximal rotation speed.
•
After you finish using the unit, take the power plug out
of the socket and disconnect the gear (9) from the
motor unit (4) by pressing on the locks (5).
USING THE CHOPPING KNIFE
Attention! Do not chop very hard products, such as nut-
megs, coffee beans and cereals.
Before you start chopping:
– Remove bones, sinews and cartilage from meat.
– Cut meat, onion, garlic, carrots etc. into approximately
equal slices.
– When chopping greens, remove stems of herbs.
13
ENGLISH