Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions - Rondell Rde-1303 Die Betriebsanweisung

Inhaltsverzeichnis
BLENDER SET RDE-1303
The blender set is intended for chopping, cutting, slicing,
whipping food products and making puree.
DESCRIPTION
1. Rotation speed control knob
2. On button «I»
3. Turbo mode on button «II»
4. Motor unit
5. Attachment locks
6. Blender attachment
7. Whisk gear
8. Whisk for beating/mixing of liquid products
9. Potato mash making attachment gear
10. Mashed potato attachment
11. Chopper geared lid
12. Cubic attachment knife
13. Cubic attachment with removable grid
14. Metal locks
15. Cubic grid
16. Chopper bowl
17. Lock button of the chopper bowl lid
18. Chopping knife
19. Shredding/slicing disc
20. Shredding/slicing disc support
21. Pusher
22. Measuring cup lid
23. Measuring cup
ATTENTION!
For additional protection it is reasonable to install a resid-
ual current device (RCD) with nominal operation cur-
rent not exceeding 30 mA. To install the RCD contact
an expert.

SAFETY PRECAUTIONS

Before using the blender set, read this instruction care-
fully. Keep these instructions for further reference. Use
the blender set for its intended purpose only as specified
in this manual.
Mishandling of the unit may lead to its breakage and
cause harm to the user or damage to his/her property.
Before connecting the unit to the mains, make sure that
your home mains voltage corresponds to the voltage
specified on unit body.
The blender set allows quick and effective operation,
but continuous operation time should not exceed
1 minute while using the blender attachment, whisk
and the mash making attachment, and 20-30 sec-
onds while chopping products in the processor.
Make at least 2 minute break between operation
cycles.
Cool down hot products when using the blender
attachment.
Do not use the unit outdoors.
Use only the accessories supplied.
Before using the unit for the first time wash all the
removable parts that will contact food thoroughly.
Before using the unit, make sure that all parts are set
properly.
Place the bowl on a flat, stable surface.
Products should be put into the bowl before switch-
ing the unit on.
Do not overfill the chopper bowl with products and
watch the level of poured liquids.
The blade of chopping knife is very sharp and danger-
ous. Handle the knife very carefully!
If rotation of the chopping knife is hindered, unplug
the unit and carefully remove products that prevent
blade rotation.
Remove products and pour out liquids from the chop-
per bowl only after complete stop of the knife.
Do not touch the rotating parts of the unit. Do not
allow hair or clothes edges get into the blades rotating
zone of blender attachment.
Do not leave the operating unit unattended.
Always unplug the unit before cleaning or if you are
not using it.
Do not use the unit near hot surfaces (gas or electric
stove, oven).
Provide that the power cord does not touch sharp
edges of furniture and hot surfaces.
Do not pull the power cord and do not twist it.
Do not touch the power plug with wet hands.
Do not use the unit if the power cord is damaged.
To avoid risk of electric shock or fire, do not immerse
the unit, the power cord and the power plug of the
unit into water or other liquids. If the unit is dropped
into water:
– do not touch the water;
– unplug the unit immediately, and only then take it
out of water;
– apply to the authorized service center for testing or
repairing the unit.
11
ENGLISH
Inhaltsverzeichnis
loading

Inhaltsverzeichnis