Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
DE
• Align the marking on the
eyepiece with the marking
on the bayonet fitting.
• Insert the eyepiece and
turn it to the right (clock-
wise)
mechanism of the body clicks into the eyepiece.
• To remove the eyepiece,
press the locking mecha-
nism of the body down-
ward and turn the eyepiece
to the left (anti-clockwise)
until it can be removed.
Adjustment of the screw-in-typ eye cup
Use without eyeglasses:
Turn the eye cup (counter-
clockwise) until it stops.
Use with eyeglasses:
Turn the eye cup (clock-
wise) until it stops.
16
until
the
locking
EN
DE
Use of the zoom eyepiece
To change magnification:
Turning
ring to the right (clockwise)
decreases magnification.
Turning
increases the magnification.
You will be able to read the magnification above
the index point.
Focusing
• For distant objects, turn
the adjustment ring for
focusing to the right (clock-
wise).
• By turning the adjust-
ment ring to the left (anti-
clockwise), you can observe objects that are
nearer.
• In order to ensure fatigue-free observation, turn
the adjustment ring for focusing a bit to the left
(anti-clockwise) until the image becomes slightly
unsharp. Then turn the adjustment ring to the right
(clockwise) until the maximum image definition is
attained for the first time.
• To retain the image definition over the entire
range of magnification, you should carry out sharp
focusing using the zoom eyepiece with the highest
magnification.
17
the
adjustment
it
to
the
left
Werbung
