Silvercrest SESR 6 A1 Originalbetriebsanleitung Seite 34

3. Place the head of the attachment
directly onto the sneaker surface to be
8 ] [
cleaned.
4. Switch on the product. The attachment
/ starts rotating.
7 ] [ [ 8 ]
5. Gently glide the head of the
attachment /
[ 6 ] [ 7 ]
surface in a slow, circular motion.
˜ Troubleshooting
Problem
The product does not work.
The attachment /
6 ] [
does not rotate.
˜ Cleaning and maintenance
˜ Cleaning
(Fig. C, F)
m NOTICE! Risk of property damage!
32 GB/IE
/
6 ] [ [ 7 ]
/ over the sneaker
8 ] [
Possible cause
The batteries
The batteries
incorrectly.
Too much pressure is applied on
/
[ 7 ] [ 8 ]
the attachment
Debris or hair is tangled around
the attachment
6. Use a slightly damp, clean cloth to remove
/
residues of dirt or sneaker cleaning
detergent from the sneaker surface.
7. Repeat the steps above until the cleaning
/
6 ] [
result is satisfactory.
8. Cleaning completed: Switch off the product.
The attachment
are discharged. Replace the batteries
[ 5 ]
are inserted
[ 5 ]
/ / .
6 ] [ 7 ] [ [ 8 ]
/ / .
[ 6 ] [ 7 ] 8 ] [
Never immerse the main unit
or any other liquid. Never hold the product
under running water.
Do not allow water or other liquids to get
inside the product.
Do not use abrasive, aggressive cleaning
materials or hard brushes for cleaning.
/ / stops rotating.
6 ] [ [ 7 ] [ 8 ]
Solution
Insert the batteries
5 ] [
correctly.
Reduce the pressure on the
attachment / /
6 ] [ 7 ] [ 8 ] [
Remove debris or hair from the
attachment / /
[ 6 ] 7 ] [ 8 ] [
in water
[ 1 ]
.
5 ] [
.
.