Silvercrest SESR 6 A1 Originalbetriebsanleitung Seite 32

˜ Before use
˜ Unpacking the product
1. Take the product out of the packaging and
remove all packaging materials and plastic
wrappings.
2. Check whether the product and all parts
are in good condition, if any damage or
defect is detected, do not use the product.
˜ Inserting/replacing batteries
(Fig. B)
INFO: Always switch off the product
before inserting/replacing batteries.
1. Open the battery compartment
the battery compartment cover
anticlockwise direction. I on the battery
compartment cover has to be aligned with
on the main unit
2. Remove the battery compartment cover
from the main unit
3. Remove discharged batteries
battery compartment
30 GB/IE
: Turn
[ 3 ]
in
4 ] [
.
1 ] [
.
1 ] [
from the
[ 5 ]
if applicable.
[ 3 ]
4. Insert 4 batteries
compartment
polarity (+ and –).
5. Close the battery compartment
Put the battery compartment cover
–
onto the main unit
Turn the battery compartment cover
–
clockwise direction until it locks in place.
I on the battery compartment cover
has to be aligned with
unit .
[ 1 ]
˜ Operation
˜ Changing attachments
(Fig. C)
INFO:
Always switch off the product before
o
changing the attachment
Select the attachment
o
[ 4 ]
care. Improper use may result in injuries or
damage to the sneaker.
into the battery
5 ] [
according to the correct
3 ] [
:
[ 3 ]
.
[ 1 ]
on the main
/ /
6 ] [ 7 ] [ [ 8 ]
/ / with
6 ] [ 7 ] [ [ 8 ]
4 ] [
in
4 ] [
.