Werbung
Verfügbare Sprachen
Verfügbare Sprachen
This is how the microwave is assembled:
560
1. Mounting hole in wall cabinet
2. Wall cabinet
3. Microwave oven
4. screw
5. Washers
The dimensions (given in mm) and the load-
bearing capacity must be observed and adhered
to.
Please note that the thickness of the wood of the
wall cabinet on which the microwave is hung must
be between 16 - 20 mm.
1) Drill holes in wall cabinet:
Drill the 4 holes (Ø 9 mm) into the wall cabinet
according to the enclosed drilling template.
2) Mounting holes on the device:
The mounting holes are located on the top of the
device and may be closed with blind plugs. These
must be removed if necessary.
3) Screwing:
Hold the microwave against the cupboard from
below and insert the screws with the washers from
above. Screw the appliance to the wall cupboard in
this way.
23
Werbung
