Werbung
Verfügbare Sprachen
Verfügbare Sprachen
SAFETY INSTRUCTIONS
1. General information
• Please read and follow these safety instructions.
• Keep them safe for future reference.
• Observe all warnings on the speaker and in the manual.
Please check the speaker for damage before use. The speaker must be in perfect
working condition. Damaged parts may lead to personal injury.
CAUTION! Subwoofers and active speakers are heavy. Be careful when lifting them to
prevent personal injury.
2. Use only as directed
• Connect this speaker according to the instructions in the manual.
• Many ELAC speakers are equipped with spikes and / or anti-slip feet. They are explicitly
provided for levelling the alignment. They have to be screwed into the thread until thread end.
For levelling on an uneven floor, it is allowed to unscrew the spikes or anti-slip feet by 2-3 turns
of thread. The speaker has always to be in perfect vertical alignment. The stability of the
speaker must not be compromised by using spikes or anti-slip feet as the speaker may tip-over.
3. Location
• Install the speakers on a level surface only
• When choosing the location of these speakers do not place them in locations that are:
• In direct sunlight
• Very humid
• Prone to vibrations
• Exceptionally hot or cold
• Near CRT Televisions (The speakers are not magnetically shielded and may
cause color issues with a CRT based TV)
• Close to magnetic cards (Since the speakers are not magnetically shielded placing
magnetic cards such as credit cards or commuter cards may cause them to fail).
WARNING! Please ensure the product is perfectly stable to avoid severe injury from tip-over. Please
note, that stability can be increased by using spikes for carpets. However, the mounting of spikes must
be carried out carefully because the spikes have very sharp ends which may cause injuries. The stabi-
lity on slippery floors can be increased by using Velcro fastening tape or double-sided adhesive tape.
Do not install the speaker near any heat sources such as radiators, heating valves, stoves, or other
apparatus (including amplifiers) that produce heat, or in areas where there is a risk of explosion.
• Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
• Don't install the speaker in a closed rack or in a closed cupboard.
• Don't put burning candles on or near the speaker.
• Do not install the speaker near transformers because electromagnetic stray fields
can cause the subwoofer(s) to produce humming noise.
• In combination with certain materials / lacquers / material surfaces, anti-slip feet
or spike washers may cause colored imprints on the surfaces.
Seite 14
Werbung
