Silvercrest STKS 17 A1 Montage-, Bedienungs- Und Sicherheitshinweise Seite 16

Repeat this process until you have selected your desired audible
signal. The last-selected audible signal is automatically stored.
Troubleshooting
After the influence of extraordinary environmental conditions (e.g. a
strong electromagnetical field) the function of the product may be af-
fected. In this case, please take off the battery of the transmitter and
unplug the receiver from the mains socket outlet for approximately 2
minutes. Then proceed again as described in the section "Synchronis-
ing the transmitter / receiver".
Electrostatic discharges may lead to malfunctions. If such malfunctions
do occur, remove the batteries for a short time and then replace them
again. Then proceed again as described in the section "Synchronis-
ing the transmitter / receiver".
Cleaning and maintenance
Before cleaning unplug the product from the power supply.
Under no circumstances should you use liquids or detergents,
as these will damage the product.
The product should only be cleaned on the outside with a soft
dry cloth.
16 GB/IE/NI