Silvercrest STKS 17 A1 Montage-, Bedienungs- Und Sicherheitshinweise Seite 15

After approx. 1 minute the signal indicator
receiver is in normal operation mode. Press the chime button
start to use the product.
Setting the signal type
The receiver can indicate the reception of a door signal either both
optically and acoustically , acoustically
Using the signal type selector switch
is to be indicated both optically and acoustically
cally or optically .
Setting the volume
Press the volume button
There are a total of 3 possible volume settings: loud, medium, soft.
Selecting the chime
Note: The product has 17 different chimes.
Press the melody selection button
sounds.
Press the melody selection button
next audible signal.
or optically .
, select whether the signal
6
until the desired volume is reached.
5
. The first audible signal
4
again to move on to the
4
will be turn off, the
1
or acousti-
GB/IE/NI
13
15