Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Shut-Down; Déclenchement Automatique - Tunze 6060 Gebrauchsanleitung

Turbelle stream
Inhaltsverzeichnis

Werbung

Automatic shut-down

®
In case of Turbelle
Blocking and run-dry protection with alert
sound: When the pump is blocked, an alert
sound (continuous sound) is released by the
driver (2), at the same time the pump is
switched off. After the blockage has been
removed, the pump is star ted again
automatically after a delay of 20 seconds.
When the pump runs dry, another alert sound
(beep tone) is released, the pump continues
to run at low protective speed. When the pump
draws water again, the beep tone will go off
(also see: „Change of the alert sound volume")
In case of Turbelle
®
Thermostat shut-down: If the motor of the
®
Turbelle
is overloaded, either by a foreign
body blocking the pump or otherwise, the
thermal circuit breaker interrupts the power
supply (at approx. 100° Celsius (212° F) motor
temperature) for a short period of time. After
the motor has cooled down, it is switched on
again automatically. First of all, remove the
mains plug, then determine and remove the
reason for the overload.
stream 6000, 6100, 6200:
stream 6060, 6080,6130:
Déclenchement automatique
Pour Turbelle
®
stream 6000, 6100, 6200 :
Sécurité de blocage et de marche à sec avec
signal sonore : lors du blocage de la pompe,
un signal sonore continu retentit au niveau du
Driver (2) et le moteur est déclenché. Après
suppression du blocage, le redémarrage est
automatique (temporisation de 20 sec). Lors
d'un fonctionnement à sec, un signal sonore
discontinu retentit et le moteur est limité en
vitesse de rotation. Ce signal disparaît dès que
la pompe est à nouveau immergée (voir encore
Volume du signal sonore).
Pour Turbelle
®
stream 6060, 6080, 6130 :
Sécurité thermique : lors d'une surcharge du
moteur de la pompe Turbelle
corps étranger), la sécurité thermique intégrée
coupe rapidement l'alimentation électrique (env.
100°C de température moteur). Après
refroidissement, la remise en service est
automatique.
Coupez
l'alimentation secteur puis remédiez à la
cause du défaut.
®
(blocage par un
au
préalable
25

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

60006080613061006200

Inhaltsverzeichnis