VEVOR DC180 Handbuch Seite 14

WHEEL GUARD ADJUSTMENT
The wheel guard is adjustable and should be
positioned to provide the operator with the best
combination of personal protection and visibility
of cutting area.
• Loosen the wheel gard locking knob and rotate
the guard to the required position. (FIG.6)
• Securely tighten the wheel guard locking knob
to lock the guard in place.
Note: the tightness of this locking knob and the
security of the wheel guard should be checked
regularly when operations commence.
• Carefully guide the blade into the workpiece.
Best
performance is achieved when cutting straight
along a pre-marked cutting line. Do not cut
deeper than 50mm (2 inches).
• If a cut deeper than 50 mm (2 inches) is
needed, make multiple passes.
• Cut smoothly, letting the machine do the work
without applying excessive force to the blade.
WARNING: Do not try to cut curved or zigzag
lines.
Never use the side of the blade as a cutting
surface. Do not use it for angled cutting.
- 13 -