VEVOR DC180 Handbuch Seite 4

WARNING: To reduce the risk of injury, user must read instruction manual.
«MISE EN
GARDE – Pour réduire le risque de blessures, l'utilisateur doit lire le
manuel d'instructions» or equivalent or symbol M002 of ISO 7010.
- M002 of ISO 7010
- Date of manufacture.
-Rated speed in revolutions per minute;
-Rated capacity in mm;
-Tools provided with a threaded spindle shall be marked with spindle
thread size;
-WARNING Always wear eye protection, "AVERTISSEMENT Toujours
porter des lunettes de sécurité" or equivalent or the sign M004 of ISO
7010 or the following safety sign:
The eye protection symbol may be modified by adding other personal
protective equipment such as ear protection, dust mask, etc.
WARNING
To reduce the risk of injury, use a proper guard and use only accessories
rated at least equal to the maximum speed marked on the tool.
In Canada, the equivalent French wording is as follows:
"AVERTISSEMENT Pour réduire le risque de blessure, utiliser un carter
approprié et uniquement les
accessoires convenant au moins à la vitesse maximale indiquée sur
l'outil."
For cut-off machines with a permanently fixed guard, the following
alternative warning may be used:
WARNING
To reduce the risk of injury, use only accessories rated at least equal to
the maximum speed marked on the tool.
In Canada, the equivalent French wording is as follows:
"AVERTISSEMENT Pour réduire le risque de blessure, utiliser
- 3 -