How To Measure Blood Pressure; Read Memory; Delete Memory - Wellion Waveplus Handbuch

HOW TO MEASURE BLOOD PRESSURE

1. Set up the arm cuff to your upper arm as described in the previous section of "ATTACHING THE ARM CUFF".
2. Press the "ON/OFF" button, all icons automatically appear for two seconds on the display, then the device
switches to measurement and displays "00".
3. When the measurement starts, the cuff in the strap will automatically inflate. This is indicated by the "Infla-
tion" symbol " ". When the measurement is completed, the results will be displayed on the LCD display.

Read memory

Press " MEM " button to inquire memory average values "AU9" Average Value Display: the latest 3 groups of
memory average values (Memory values are displayed regardless of period). Press the "MEM" button to scroll
through the memorized results, starting with the latest measurement. Press "MEM" to go up (latest result) and
"SET" to go down (oldest) in the list of results.

Delete Memory

Enter the "READ MEMORY" mode, press and hold the "MEM" button for five seconds until the LCD displays
"no". This indicates that all stored results have been deleted successful.
MEM
EN
35