Time And System Setup; Setup Unit Mmhg/Kpa - Wellion Waveplus Handbuch

TIME AND SYSTEM SETUP

1. Press "SET" button for the Time display.
2. In the off state, press and hold the "SET" button until the year number displays and
EN
flashes on the LCD to enter setting mode.
3. Press "MEM" button to adjust the year, then press "SET" button again to save your
setting and enter the month-setting mode.
4. Press "MEM" button to adjust the month. Repeat procedure to adjust date/hour/
minute.
SET

SETUP UNIT mmHg/kPa

The results can be displayed as one of two different units: mm Hg (mmHg) or kPa (kPa).
The preset factory unit is mmHg. Press "ON / OFF" button for 10 seconds to display unit switching interface,
then press "MEM" button to select mmHg / KPa, press "ON / OFF" button to exit. After the units have been
selected and confirmed according to the instructions above, the display shows mmHg / kPa. After a normal
start, the selected units are then shown as blood pressure units. Please note that all results`units in the device
memory will be changed accordingly as well.
32
Year Month Day Hour Minute