Silvercrest SHBS 3.7 C2 Bedienungsanleitung Seite 44

6. Operation
NOTE:
• Figure D: For all applications hold the shaver with an angle
of 45° to your skin.
Regardless of the charging state of the battery, the 5-in-1 hair and
beard trimmer can always be mains-operated.
1. For mains operation, ensure that the hair and beard trim-
mer 5 is switched off.
2. Connect the power unit 10 to the connector of the hair and
beard trimmer 5.
3. Insert the power unit 10 into a readily accessible wall socket
whose voltage matches the voltage stated on the rating plate.
4. Switch on the device with the on/off switch 7.
NOTE:
• When the hair and beard trimmer remains connected to the
wall socket after being switched off, it will be charged auto-
matically.
6.1 Transport safety lock
When the transport safety lock is activated, the battery symbol 8
flashes blue 3 times.
• Press and hold the on/off switch 7 for approx. 3 seconds to
activate/deactivate the transport safety lock.
• By connecting the power unit 10, the transport safety lock is
deactivated, and also cannot be activated while plugged in
to the power supply.
42
GB