cecotec POWER ESPRESSO 20 PRO LATTE Bedienungsanleitung Seite 45

stops coming out but be careful not to burn yourself.
6. To switch off the coffee machine, press the power button. All indicator lights will turn off.
Note: if you wish to prepare coffee immediately after steaming, you must first dispense water
to allow the machine to cool down.
4. CLEANING AND MAINTENANCE
Switch off, unplug the appliance from the mains, and allow it to cool down before cleaning
-
or repairing it.
Use a soft, damp cloth to clean the surface of the appliance.
-
Do not use corrosive or abrasive cleaning agents or sponges when cleaning the machine
-
as they may damage the surface.
Do not immerse the appliance or any of its non-removable parts in water.
-
Clean the water tank, drip tray, cup/mug tray, and other removable parts periodically and
-
dry them before re-installing them.
Cleaning mineral deposits
1. Fill the water tank to the MAX mark and descaler according to the proportions indicated by
the manufacturer.
2. Place the portafilter without coffee in position.
3. Press the power button and wait for the indicator light to light up indicating that the
appliance is hot.
4. Press the coffee button for the machine to dispense 2 cups of water.
5. Then, press the coffee button again to close the pump and wait for 5 seconds.
6. Fully turn the steam knob to
7. Press the coffee button again for the machine to dispense 2 more cups of water.
8. Then, press the coffee button again to close the pump and wait for 5 seconds.
9. Restart the coffee machine and repeat these steps until there is no more water left in the
tank.
10. Once the water tank is empty, prepare a coffee by filling the water tank again with tap
water up to the MAX mark, but without coffee. Repeat the previous steps until there is no
water left in the tank.
11. This will help to remove any residues that may have been left in the water tank.
position and place a jug under the steamer.
POWER ESPRESSO 20 PRO LATTE
ENGLISH
45