Parkside PSSFS 3 A2 Bedienungs- Und Sicherheitshinweise Seite 14

˜ Use
Before every use: Check the product for damages .
Before taking a measurement
m ATTENTION! Before connecting the product: Separate any multi-switches and the
satellite receiver from their power supply . Otherwise, a short-circuit may occur . Avoid
short-circuiting or overloading the connected F connection cable or the product's
connector . Risk of product damage .
For better sensitivity and better results, do not position the product directly in front of
the satellite antenna .
Connecting the product and alignment of the satellite antenna
Remove the protective caps
connector .
2 ] [
Connect the output of your LNB with the LNB connector
purpose, use the included coaxial cable with F-plug .
12 GB/IE/NI
from the LNB connector
10 ] [
and from the receiver
5 ] [
. For this connection
5 ] [