6.2.2 Configuring newly taught-in devices:
Once you have taught-in your device to the CCU, it will
be moved to the inbox. Here, you must configure the
device and its associated channels in order to make
them available for operating and configuration tasks.
Give the device a name and assign it to a room. You
can also make individual parameter settings.
Now you can use the „WebUI" user interface to control
your device, configure it, connect it directly to other
devices, or use it in central control unit programs to
display the data measured. Please refer to the „We-
bUI" operating manual for more details (you can find
this in the „Downloads" area of the website
www.homematic.com).
7
Conditional switching
With the function "Conditional switching", connected
consumers or other HomeMatic devices can be
switched depending on a defined condition.
Example: You have connected your dryer in the cel-
lar with the switching actuator and want to receive an
audio signal that will let you know when the dryer is
finished. Therefore, you can connect the switching ac-
tuator with a HomeMatic Wireless MP3 Chime via the
36