Herunterladen Inhalt Inhalt Diese Seite drucken

When To Replace The Exhaust Filter; How To Replace The Airclean Exhaust Filter; Replacing The Active Airclean 30 And Hepa Airclean 30 Exhaust Filters - Miele HS08 Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für HS08:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
 Replace with a new dust compart-
ment filter.
 Close the filter frame.
 Fit the dustbag into the holder as far
as it will go.
 Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.

When to replace the exhaust filter

Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (dia.
02).
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags. An
AirClean exhaust filter is supplied with
every packet of Miele dustbags.
b Active AirClean 30 (black)
c HEPA AirClean 30 (white)
Replace if the display for the exhaust fil-
ter change indicator is completely filled
with red (dia. 07). This occurs after ap-
prox. 50 hours of operation which is
equivalent to about a year of average
use. The vacuum cleaner can still be
used. However, the suction power will
be reduced as will the effectiveness of
the filter if it is not replaced in good
time.
How to replace the AirClean exhaust
filter (dia. 28, 29 + 30)
Do not use more than one exhaust fil-
ter at a time.
 Open the exhaust filter compartment
lid.
 Remove the filter grille.
 Open the filter grille and remove the
used AirClean filter by one of the
clean, unsoiled sections.
 Replace it with a new AirClean filter.
If you wish to fit an Active
AirClean 30 or a HEPA AirClean 30,
see "Maintenance - Replacing one
type of exhaust filter with another".
 Secure the catch on the filter grille
and replace it inside the exhaust filter
compartment.
 Close the exhaust filter compartment
lid.
Replacing the Active AirClean 30 and
HEPA AirClean 30 exhaust filters
Do not use more than one exhaust fil-
ter at a time.
 Open the exhaust filter compartment
lid.
 Remove the exhaust filter (dia. 31).
 Insert the new exhaust filter and
press the exhaust filter change indic-
ator (dia. 05).
After approx. 10 - 15 seconds a thin red
stripe will appear in the left hand side of
the display (dia. 06).
If you wish to fit an AirClean filter,
see "Maintenance - Replacing one
type of exhaust filter with another".
 Close the exhaust filter compartment
lid.
en
43

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis