Renogy ROVER Serie Installation Und Handbuch Seite 22

Programming
1. This screen is displaying the current Load Mode.
2. To enter screen 2 press and hold the Enter button. This screen will allow you to change
the load mode.
3. To change the load mode press the up or down button.
4. Once you have selected the desired load mode press the Enter button to save the setting.
5. To exit the programming setting press the left button.
Load Mode Options
Setting
1-14
15
16
21
Load Terminal
1
Mode
Automatic(On/Off)
Time control
Manual
Test
24Hr
2 3
The load will turn on at night when the solar
panel is no longer
after a short time delay. The load will turn
off when the panel starts producing power.
When the panel is no longer producing
power the load will be ON for 1-14 hours
or until the panel starts producing power.
In this mode, the user can turn the Load
On/Off by pressing the Enter button at any
time.
Used to troubleshoot
Time Delay).
load will be off and when no voltage is
detected
The load will be on for 24 hours a day
4
Description
producing
load terminal (No
When voltage
load will be on.
any power
is detected
EN