Atlas Copco EP 7PTX-55 HR10-RE Produktanweisungen Seite 13

EP7PTX55 HR10-RE
• Clean the silencer and the strainer of the inlet adapter, change the filter and
change worn or damaged parts.
• Clean the trigger and reversing valve and change worn or damaged parts.
General
Tightening of threaded connections
The tightening torques indicated in the spare parts list are established to achieve
the correct clamping force and to prevent the parts from coming loose. When
serviced these parts must be able to open up without being destroyed. In special
circumstances (depending on application and usage) the parts may however
come loose after some time of operation. In such cases the torque could be in-
creased 10-20% and if necessary some type of low or medium threadlocking
fluid could also be applied.
Example
EN
© Atlas Copco Industrial Technique AB - 9836 950700 00
Service instructions
13