AWG Z2 Originalbetriebsanleitung Seite 30

AWG | Fittings | Inductors Z2, Z4 and Z8
4 Delivery, transport, storage
4 .1 Delivery
The Inductor has been carefully packaged at AWG Fittings GmbH.
>
After unpacking, check the delivery for damage and verify completeness.
>
Any damage must be immediately reported to the carrier.
>
If parts are missing, immediately inform the responsible specialist
dealer or AWG Fittings GmbH.
The inductor ‎ i s delivered ready to be connected and is immediately ready
for use in an extinguishing system after connecting with a suitable adapter.
No special commissioning is required before first use.
4 .2 Transport in a vehicle, storage
The inductor has run dry.
9
The inductor can be transported and stored in any position.
Especially during transport inside a vehicle, the inductor must not fall
over. If necessary, secure the inductor using a belt. During transport, the
inductor must not be damaged by other heavy equipment.
To ensure proper functioning, the inductor may only be stored in a clean
condition.
M1061B10 | Rev. 03-08/24
dElivEry, tranSport, StoragE
30