Herunterladen Diese Seite drucken

Linak DESKLINE DPF 1C Desk Panel Bedienungsanleitung Seite 14

Vxdsm-vxbhm
Vorschau ausblenden Andere Handbücher für DESKLINE DPF 1C Desk Panel:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4. DISPOSAL OF LINAK'S PRODUCTS
As LINAK's customers often ask us how our products can be disposed of or scrapped we have prepared this
guidance that enables a classification to different waste fractions for recycling or
combustion.
Guidance
We recommend that our products be disassembled as much as possible and divided into different waste groups
for recycling or combustion.
For example, waste can be sorted into metals, plastics, cable scrap, combustible material and recoverable
resources.
Some of these main groups can be further divided into subgroups; e.g. metal can be divided into steel/
aluminium/copper and plastic can be divided into ABS/PA/PE/PP.
As an example, the table below breaks down the different components in LINAK products to various recycling
groups:
Product
Components
Handset/Control:
Plastic housing
Cable
PCB board
By now, almost all our casted plastic parts are supplied with an interior code for plastic type and fibre contents,
if any.
Main groups of disposal
Product main groups
Metal scrap
Cable scrap
DPG
X
8/38
Recycling group
Plastic recycling or combustion
Cable scrap or combustion
Electronics scrap
Electronics
Plastic recycling
Comments
scrap
or
combustion
X
X
EN 114065
EN
Disposal of batteries
"Details regarding safe disposal of used and leaking batteries:
Batteries should be disposed in accordance with appropriate federal, state and local regulations. LINAK
recommends that used or leaking batteries are disposed through local recycling system. Please do not throw
used or leaking batteries in normal household waste or in nature. This will cause damage to the enviroment.
How to deal with leaking batteries
Leaking batteries should be disposed as described above.
If leaking batteries are discovered in the product, the batteries must be removed at once to minimise damage to
the product.
If leaking batteries are left in the product, it become defective.
It is recommended to use plastic gloves when handling leaking batteries. The contents of a leaking batteries can
cause chemical burns and respiratory irritation.
If exposed to the contents of a leaking battery, please wash with soap and water. If irritation persists, please
seek medical attention. In case of eye contact, please flush eyes thoroughly with water for 15 minutes and seek
medical attention."
5. LINAK APPLICATION POLICY
The purpose of the application policy is to define areas of responsibilities in relation to applying a LINAK
product defined as hardware, software, technical advice, etc. related to an existing or new customer
application.
LINAK products as defined above are applicable for a wide range of applications within the Medical, Furniture,
Desk and Industry areas. Yet, LINAK cannot know all the conditions under which LINAK products will be
installed, used, and operated, as each individual application is unique.
The suitability and functionality of the LINAK product and its performance under varying conditions (application,
vibration, load, humidity, temperature, frequency, etc.) can only be verified by testing, and shall ultimately be
the responsibility of the LINAK customer using any LINAK product.
LINAK shall be responsible solely that the LINAK products comply with the specifications set out by LINAK and it
shall be the responsibility of the LINAK customer to ensure that the specific LINAK product can be used for the
application in question.
9/38
EN 114065
EN

Werbung

loading