x-sense SD11 Bedienungsanleitung Seite 7

10.Rep ace detectors immediate y if they are not working properly. Smoke detector that does not
work cannot a ert you to afire.
11.Keep at east one working fire extinguisher on every floor, and an additional one in the kitchen.
12.Have fire escape adders or other reliable means of escape from an upper floor in case stairsare
blocked. Install and maintain fire extinguishers on every evel of the home and in the kitchen,
basement and garage. Know how to use a fire extinguisher prior to an emergency.
Troubleshooting
PROBLEM
Smoke detector does not
respond.
Red LED flashes and the alarm
sounds one beep every 60 seconds.
The detector is malfunctioning. Pleaseclean your smoke
Red LED flashes and the alarm
detector,
sounds two beeps every40 seconds.
Falsealarmstriggered intermittently
or when residents are cooking,
taking showers, etc.
10
SOLUTION
Pleasecheck whether the detector is properly attached to the
mounting bracket.
Battery is ow.
Or REPLACE MMED ATE-LY!
1. Clean smoke detector.
2. Reposition the detector according to the instructions of
installation positioning.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Pleaserecycle where
facilities exist. Check with Local Authority or retai er for recycling advice.
Manufacturer and Service Information
X-Sense nnovations Co., td.
Address: 84-503 D,Tower B,Kexing Science Park,No.15 Keyuan Road,Technology ParkCommunity,
Yuehai Avenue, Nanshan District, Shenzhen, 518057, CHINA
Email:support@x sense.com