The Kvm Switch »Dl-Mux2-Mc2; Scope Of Delivery - G&D DL-MUX2-MC2 Bedienungsanleitung

The KVM switch »DL-MUX2-MC2«
The KVM switch »DL-MUX2-MC2«
The KVM switch DL-MUX2-MC2 enables the user to operate up to two computers
through one console.
NOTE:
The MC2 variant of the KVM switch lets you connect computers with up
to two video outputs. The video signals of these computers are displayed on two
separate console monitors.
The computer, which is connected to the KVM switch, can be accessed
 by pressing either the buttons at the device,
 via configured select keys,
 via configured step keys,
 via a serial interface,
 via Config Panel web application
 or via SNMP.
The front panel of the device provides two USB 2.0 interfaces to operate any USB
devices. The connected USB devices are supplied to the active computer.
The KVM switch operates with full keyboard and mouse emulation on each chan-
nel and therefore guarantees error-free booting and secure operation at all connected
computers.

Scope of delivery

 1 × KVM switch DL-MUX2-MC2
 1 × 19" RM-Set-435-1,5HE
 1 × Service cable (USB-Service-2)
 2 × IEC cable (PowerCable-2 Standard)
 1 × Installation and Operating Guide
 1 × Operating Guide Config Panel web application
NOTE:
KVM cable sets are used to connect the computers to the KVM switch.
PS/2 as well as the USB variants of these cable sets are available in different
lengths.
2 · G&D DL-MUX2-MC2