The »Dvimux4-Usb« Kvm Switch; Package Contents - G&D DVIMUX4-USB Installation Und Bedienung

The »DVIMUX4-USB« KVM switch
The DVIMUX4-USB KVM switch enables you to operate up to four computers via
one console.
The console is provided with a USB keyboard, a USB mouse and a digital and/or
analog monitor. The computers connected to the KVM switch are operated from
the installed console.
The switching between computers takes place either via the pushbuttons on the
front panel, configurable key combinations, or a serial device which is connected to
the Service port.
The front panel of the device provides two USB 2.0 interfaces to operate any USB
devices. The connected USB devices are available to whichever active computer.
After enabling the USB hold function (see page 32), the USB devices can be perma-
nently switched to a defined computer (see page 13). The switching of the USB
devices remains the same when switching the KVM channel.
NOTE:
The KVM switch emulates keyboard and mouse on each channel and
hence guarantees error-free booting at all times.

Package Contents

 1 × DVIMUX4-USB KVM switch (basic or multi-channel variant)
 1 × DVI-Divider adapter per supported video channel
 1 × data cable (Update-Cable-2)
 1 × power cable
 1 × »Installation and Operation« manual
NOTE: The devices of the DVIMUX4 series are optionally available as desktop or
as rackmount variant (see Order numbers on page 33).
Rackmount variants should be installed to the rack with the front panel facing for-
wards.
A corresponding KVM cable is required in order to connect the computers to the
KVM switch. The appropriate KVM cable sets available are listed on page 33.
The »DVIMUX4-USB« KVM switch
G&D DVIMUX4-USB · 3