Using The Reset Button; Resetting The Default Settings - G&D DL-MUX2-MC2 Bedienungsanleitung

Using the Reset button

The front panel of the device provides the Reset button (between the Identification
LED and the CPU LEDs).
This button enables you to reset the default settings as well as to temporarily deacti-
vate the netfilter rules.
NOTE: The button is located behind a drilling in the front panel: this way, it cannot
be pressed by accident.
Use a thin, pointed item to press the button.

Resetting the default settings

Pressing and holding the button during booting resets the default setting of the KVM
switch.
NOTE:
After this function has been carried out, the default settings of the KVM
switch listed on page 15 are reactivated.
How to reset the default settings:
1. Switch off the device if in operation.
2. Press and hold the Reset button on the front panel of the device.
3. Keep the button pressed and switch on the device.
4. Release the button as soon as the green Switch LED is blinking.
NOTE: The default settings can also be reset in the Config Panel web application.
Using the Reset button
G&D DL-MUX2-MC2 · 13