The »Dvimux8-Osd-Ps/2« Kvm Switch; Package Contents - G&D DVIMUX8-OSD-PS/2 Bedienungs Und Installationsanleitung Handbuch

The »DVIMUX8-OSD-PS/2« KVM switch
With the DVIMUX8-OSD-PS/2 KVM switch, you can operate up to eight computers
over one console.
The console is provided with a PS/2 keyboard, a PS/2 mouse and a digital and/or
analog monitor. The computers connected to the KVM switch are operated at the
installed console.
You can switch between computers either by using the buttons on the front panel,
configurable key combinations or a serial device which is connected to the RS232
interface.
The front panel of the device provides two USB interfaces to connect a USB key-
board and/or a USB mouse.
NOTE:
The KVM switch emulates keyboard and mouse on each channel and
hence guarantees error-free booting at all times.

Package contents

 1 × DVIMUX8-OSD-PS/2 KVM switch (basic or multi-channel variant)
 1 × Adapter (DVI-Divider) for each supported video channel
 1 × Rackmount set (19" RM-Set-435-1HE)
 1 × Data cable (USB-Service-2)
 1 × Power cable (PowerCable-2 Standard)
 1 × Manual »Installation and Operation«
NOTE:
Connecting computer and switch requires KVM cable sets. You can find a
list of all available cable sets on page 53.
The »DVIMUX8-OSD-PS/2« KVM switch
G&D DVIMUX8-OSD-PS/2 · 2