HOMCOM TSP40-MA Bedienungsanleitung Seite 5

Fill the water tank:
Unscrew the valve cover to open the tank turning it anticlockwise, fill the tank with cold
and clean water making sure not to overfill it. To close the tank, screw the valve cover
back on securely turning it clockwise. Turn the tank over and place it back into its
designated space at the back of the fan main body.
Loosen tighten.
ATTENTION!
● Make sure the product is unplugged from the mains before filling or refilling the water
tank.
● Only use water in the water tank. Do not add any chemicals, oils or other additives.
● Only use cold or lukewarm water in the water tank. The water must not be warmer than
40°C.
Place the fan on a dry and stable surface and insert the plug on the socket; the unit will
emit a short "BIP" sound indicating that power is supplied.
ON/OFF button:
● Press the button to position
mist function.
● Press the button to position
TIMER button:
● When the unit is operating, you can set the timer to switch the fan off automatically after
the set time. Press the timer button repeatedly to select the desired time period from 0 -
120 minutes.
Control panel
, the fan will be power on. It can select the speed and
, the fan will be power off.
5