Care And Maintenance - Fillikid Fill Bedienungsanleitung

Headrests and shoulder belts
see pictures 21 - 22
The handle of the infant carrier module can be
can be adjusted in 4 positions. 21
!1 To put the baby down safely outside the car seat
!2 To put the baby into the car seat
!3 For carrying and transporting the baby or for
installation in the car (with base)
!4 For installation in the car (without base)
To adjust the handle, press the buttons on both sides of
the handle to release it ,22 -1 and then turn the handle
until it locks into one of the positions. 22 -2
Height adjustment
for head restraints and shoulder belts
see pictures 23 - 25
Check that the shoulder belts are adjusted to the correct
height. Please select the correct pair of shoulder belt slots
according to the child's height. 23
Pull the height adjuster outwards with 24 your thumb and
adjust the height of the headrest up and down to adjust
the shoulder belt to a comfortable position.25

Care and maintenance

With daily use, the child seat should be checked regularly and replaced after an accident.
Please store the child seat in a dry and ventilated place so that it does not become mouldy. If the child seat
becomes dusty, clean the safety belt and the plastic parts with a damp sponge.
by wiping it with a damp sponge and let it dry naturally.
If food or drink accidentally falls on the buckle, remove the safety belt from the baby seat and rinse it carefully with
warm water. Please remove the infant carrier and base from the vehicle seat if you are not going to use it for a long
time. vehicle seat if you are not going to use it for a long time. Place the baby car seat child restraint in a cool, dry
place and in a place where your child cannot
cannot reach.
Washing instructions
Clean the entire fabric cover of the child seat. Never use a solvent, chemical detergent or lubricant on any part of
your child seat.
EN