fillikid fill Bedienungsanleitung Seite 12

EN
Warning
Check the ISOFIX guides regularly for dirt and clean them if necessary. Reliability can be affected by
the ingress of dirt, dust, food particles, etc.
DO NOT place objects in the area of the load feet in front of the base. DO NOT use load bearing
contact points other than those described in the instructions and marked on the child restraint. Please
do not use this child restraint if it has been dropped from a great height, has hit the ground at a
considerable speed or shows visible signs of damage. We are not responsible for replacement if the
child seat has been damaged under these abnormal conditions. If any of the above occurs, a new child
seat must be purchased
Emergency
In the event of an emergency or accident, it is very important that your child receives immediate first aid
and medical attention
Information about the product
"i-Size" (Integral Universal ISOFIX Child Restraint Systems) is a category of child restraint
systems for use in all i-Size seating positions in a vehicle.
Vehicle manufacturers' manuals do not yet list i-Size compatibility. This seat and base are also
approved for use in ISOFIX compatible vehicles. Please check the vehicle manufacturer's website
or ask your dealer.
1. according to ECE regulation R129/03, the infant carrier with base is a universal ISOFIX child
restraint system that must be secured using the ISOFIX connectors.
2. this is an "i-Size" child restraint system. It is approved under UN Regulation No 129 for use on
"i-Size compatible" vehicle seats as specified by the vehicle manufacturer in the
Owner's Manual of the vehicle.
3. in case of doubt please contact the manufacturer of the child restraint system or the dealer.