fillikid fill Bedienungsanleitung Seite 13

Installation
see pictures 1 - 2
1 - A ISOFIX attachments
This infant carrier module is suitable for car seats with i-Size
ISOFIX anchorage points with the base.
1 - B 3-point safety harness
This is a universal child restraint system with a safety belt
approved under UN Regulation No. 129 for use in the specified
"universal seating positions".
DO NOT install this infant restraint on vehicle seats that move
during installation
Installation with foot
see pictures 3 - 11
1. fold out the support leg from the storage
compartment. 3
2. attach the ISOFIX guides to the ISOFIX
anchorage points. 4
The ISOFIX guides can protect the surface of the
car seat from damage. They can also guide the
ISOFIX connectors.
3 . Press the ISOFIX button to pull the two locking
arms out of the base. 5
NOTE
You can install this position
The position cannot be installed
Do not install the child seat on the front
seat with airbag
Only ISOFIX attachments or three-point
seat belts can be installed in this position.
EN