Unitest Ohmtest 9072 Bedienungsanleitung Seite 10

PTDB90720000-01.qxd
Contents
Contents
1.0 Introduction / Scope of supply ....................11
2.0 Transport and storage ................................11
3.0 Safety..........................................................12
4.0 Operating elements and connections ..........13
5.0 Measurements ............................................13
5.1 Preparation and safety measures ................13
5.2 Continuity-Test............................................13
6.0 Maintenance................................................14
6.1 Cleaning ......................................................14
6.2 Battery replacement ....................................14
7.0 Technical Data ............................................15
References marked on instrument or in instruction
manual:
Warning of a potential danger, comply with in-
struction manual.
Reference. Please use utmost attention.
Caution! Dangerous voltage. Danger of electri-
cal shock.
Continuous double or reinforced insulation
complies with category II IEC61140.
Symbol for the marking of electrical and elec-
tronic
2002/96/EC).
Conformity symbol, the instrument complies
with the valid directives. It complies with the
EMV Directive (89/336/EEC). It also complies
with the Low Voltage Directive (73/23/EEC).
The instruction manual contains information
and references, necessary for safe operation
and maintenance of the instrument. Prior to
using the instrument (commissioning / assem-
bly) the user is kindly requested to thoroughly
read the instruction manual and comply with it
in all sections.
Failure to read the instruction manual or to com-
ply with the warnings and references contained
herein can result in serious bodily injury or in-
strument damage.The respective accident pre-
vention regulations established by the profes-
sional associations are to be strictly enforced at
all times.
10
18.10.2005
equipment (WEEE
15:34 Uhr
page
Directive
Seite