Making A Measurement; Calibration - Pce Instruments Ram 100 Bedienungsanleitung

6.4

Making a measurement

After setting all parameters, use the BACK key to return to the measurement screen.
Point the PCE-RAM 100 sensor toward the radiation source. On the measurement screen, you
can see the values of radiation and the accumulated radiation.
With the navigation keys UP or DOWN, you can display three different screens:
Numerical screen
Graphical screen
Statistical screen
By navigating with the LEFT and RIGHT keys, you can display the measurement screen or the
pulse screen.
Press the BACK key for 2 seconds if a reset of all measurement values is needed.
Press the HOLD key for 1 second if you want to hold all measurement values.
7

Calibration

The calibration option in the menu is password-protected. If calibration is needed, please send
the device to PCE Instruments. You will find our contact details at the end of the manual.
© PCE Instruments
46