Display - Pce Instruments Ram 100 Bedienungsanleitung

3.3

Display

With the navigation keys UP and DOWN, you can display three different screens:
Measurement screen
Chart screen
Average screen
With the navigation keys LEFT and RIGHT, you can display the measurement screen or the pulse
screen.
3.3.1 Measurement screen
1. This indication shows the particles selected for measurement by the Geiger counter
2. Isotope used as a reference for the measurement calculation
3. Time used to calculate the radiation dose, in hours
4. Radiation measurement value and unit
5. Accumulated radiation measurement and unit
6. Remaining time to finish the calculation of the accumulated radiation dose
7. Chart showing radiation measurement values
8. Continuous measurement and storage indicator; duration of accumulated radiation
measurement mode [see also 3.]
9. Shows the elapsed time since power on when continuous accumulated radiation mode
is selected
10. Maximum, minimum and average value of the accumulated radiation measurement
© PCE Instruments
29