PCE Instruments RAM 100 Bedienungsanleitung Seite 36

5.1.2 Measurement menu: Ticker
Used to enable or disable the ticker. If enabled, the ticker sounds when a particle reaches the
sensor.
5.1.3 Measurement menu: Accumulation dose
Period of time used to calculate the accumulated radiation. The period of time can be set from 0
to 24 hours. On the measurement screen, the selected time, in minutes, appears at the bottom of
the display.
If the period of time is set to 0, there is no limit to the time used for the measurement of the
accumulated radiation. An infinity symbol appears on the screen, and the accumulation time is
set to 0. On the measurement screen, the elapsed time, in days, hours and minutes, appears at
the bottom of the display.
© PCE Instruments
33