PCE Instruments RAM 100 Bedienungsanleitung Seite 40

5.1.8 Measurement screens
Measured values are displayed on three different screens: the numerical screen, the statistical
screen (maximum, minimum and average values) and the graphical screen. The screen can be
changed using the navigation keys UP and DOWN. The following illustrations show the numerical,
statistical and graphical screens.
Using the navigation keys LEFT or RIGHT, you can switch between the radiation measurement
screen and the pulse screen. The following illustrations show the pulse screen.
The following table shows the available formats of representation of the measured parameters.
Radiation value,
accumulated radiation value,
radiation units,
Numerical
accumulated radiation units,
selected sensor shield,
selected isotope
Maximum, minimum and average
Statistical
radiation value
Graphical Radiation value
Radiation
© PCE Instruments
37
Pulses
Period of time selected to measure the
number of pulses,
pulses (particles) counted in the
selected period of time,
pulses counted in counts per second or
counts per minute,
count started time indication and
dialogue showing the remaining time to
finish the measurement,
count finished time indication