SilverCrest SADD 12 A1
• Place the lid (3) back on the water reservoir (4), holding the lid (3) by the edge.
• Now place the glass cylinder (2) back into the diffuser casing (1).
The aroma diffuser is now ready for you to use the diffuser function.
9.1 Switching between modes
You can use the buttons (6, 8) to select different mode combinations. The functions of the
buttons (6, 8) are listed below:
Button 8 (diffuser function)
1st press
2nd press*
3rd press*
*: In interval mode, the fan runs continuously. After the diffuser function is switched off, the
fan runs on for a few seconds to cool the electronics in the device.
Button 6 (light effects)
1st press
2nd press
3rd press
4th press
48 - English
Diffuser "on"
Diffuser switches between 'on' and 'off' every 15 seconds.
Diffuser "off"
Light "on" (100%)
Light "on" (50%)
Light "on" - flickering
Light "off"