SilverCrest SADD 12 A1
8.1 Suitable essential oils
CAUTION! Under some circumstances, drops of oil can damage the surface of
furniture. If necessary, place a coaster under the aroma diffuser.
• Use only scented oils and/or other essential oils (not provided).
• Always follow the manufacturer's instructions on scented oils and/or essential oils.
9. Getting started
Connect to the mains by plugging the mains power adapter (5) into a mains socket which
complies with the power adapter specifications. Then insert the connector on the cable into
the plug socket (7) on the diffuser casing (1).
CAUTION! If the device is faulty or used incorrectly (too much liquid added),
liquid can leak out of the bottom of the device.
CAUTION! If there is no liquid in the water reservoir (4), the diffuser cannot be
switched on using the button (8). Instead, the aroma diffuser flashes three times.
However, the light effects can be adjusted using the button (6).
The individual parts of the aroma diffuser [diffuser casing (1), glass cylinder (2), water
reservoir (4) and lid (3)] can easily be dismantled and put back together again without
tools. This makes it easy to fill and to clean.
The procedure for filling is as follows:
46 - English