If the selected drying programme cannot be combined with the desired functions,
these functions cannot be selected or will be cancelled and the indicators switches
off automatically.
5.4.4 Activation of the crease protection
F
UNCTION
Using this function, you can activate the crease protection for a drying
programme manually.
C
REASE PROTECTION
textiles from creasing. The drum rotates intermittently during the drying
programme to protect textiles from creasing. The crease protection starts
automatically at the end of a dryer programme.
The duration of the manually set crease protection is 180 minutes. After the time
has elapsed, the function is deactivated automatically.
To activate the crease protection for a drying programme manually, press and
hold the « UV » -
crease protection («
The « C
REASE PROTECTION
programmes.
If the selected drying programme cannot be combined with the desired functions,
these functions cannot be selected or will be cancelled and the indicators switches
off automatically.
5.4.5 Activation of the UV sterilisation
ACTIVATION OF LAUNDRY STERILISATION BY
Using this function, you can activate UV sterilisation for a dryer programme. The
UV light remains activated during the entire drying process and is used to sterilise
the laundry.
Depending on model.
28
« C
REASE PROTECTION
SELECTION OF THE CREASE PROTECTION
(Ger.: Knitter Schutz): The crease protection protects
for 3 seconds. The operational status indicator of the
BUTTON
») is indicated on the control panel.
» -
FUNCTION
F
« UV
UNCTION
(Ger.: K
NITTERSCHUTZ
may not be available for all drying
STERILISATION
~
~
81
) »:
28
»:
UV
LIGHT