Before First Use; Mounting The Side Brushes; Inserting The Rechargeable Battery - Philips FC8810 Bedienungsanleitung

English
10

Before first use

Mounting the side brushes

Inserting the rechargeable battery

2
1
1 Unpack the side brushes and place the robot upside down on a table or
on the floor.
2 Push the side brushes onto the shafts on the bottom of the robot.
Note: Make sure you attach the side brushes properly. Press them onto
the shaft until you hear them lock into position with a click.
You have to insert te rechargeable battery before use.
Note: Please handle the rechargeable battery with care. Avoid dropping the
battery. This will ensure maximum lifetime for your battery.
1 Press the ribbed sections on the battery cavity cover to unlock it.
2 Slide te battery cavity cover off the robot.
3 Remove the plastic from the rechargeable battery.
4 Insert the rechargeable battery into the battery cavity.
Note: Make sure that the print on the battery points upwards and that the
connectors point in the right direction.
5 Slide the battery cavity cover back onto the robot.