Equaliser Function For All Modes; System Settings For All Modes - Parkside Pbra 20-Li B2 Originalbetriebsanleitung

GB MT
1. Ensure that neither of the devices is
connected to a playback device via
Bluetooth .
®
2. Press the Source button (17) repeatedly
until the time display shows "Bluetooth".
3. Press the TWS button (18) once on
each device. The TWS indicator will
flash on the display (9).
4. The devices connect to each other and
the TWS indicator on the display (9) of
one device stops flashing. "TWS Con-
nected" appears in the display.
5. The device on which the TWS indicator
continues to flash is the master device.
"TWS Disconnected" appears in the
display. The mobile phone is now con-
nected to this device as described in
the section "Operating via Bluetooth
"TWS Connected" now appears in the
display.
6. To cancel the connection between the
two speakers, press the TWS button
(18) once.
Equaliser function for
all modes
The device features 5 predefined
equaliser modes: Normal, Jazz,
Popular, Classic, Rock.
1. Press and hold the Info/Advanced
button (10) for approx. 2 seconds to
access the Settings menu.
2. Use the volume control (14) to scroll to
the list entry "System".
3. Push the volume control knob (14) to
confirm the selection.
4. Use the volume control (14) to scroll to
the list entry "Equaliser" and confirm
the selection by pressing the volume
control (14).
5. Select the desired equaliser mode and
confirm the selection by pressing the
volume control (14).
42
Setting the equaliser manually
1. Press the Tune button (13) to enter the
manual equaliser setting.
2. Select the desired value for the treble
(T) by turning the volume control (14).
3. Set the desired value for the bass (B)
by pressing the NEXT / PREV buttons
(12/16).
4. Press the volume control (14) to confirm
the settings.
System settings for all
modes
Information on special settings for
the different playback modes can
".
be found in the relevant chapters.
®
In Radio mode (FM and DAB+)
1. Press and hold the Info/Advanced
button (10) for approx. 2 seconds to
access the Settings menu.
2. Scroll to the list entry "System" using
the NEXT / PREV buttons (12/16) or
the volume control knob (14).
3. Push the volume control knob (14) to
confirm the selection.
4. Scroll to the desired entry using the
NEXT / PREV buttons (12/16) or the
volume control knob (14).
5. Push the volume control knob (14) to
confirm the selection.
When playing back external media
(USB, AUX and Bluetooth
1. Press and hold the Info/Advanced
button (10) for approx. 2 seconds to
access the Settings menu.
2. Scroll to the desired entry using the
NEXT / PREV buttons (12/16) or the
volume control knob (14).
3. Push the volume control knob (14) to
confirm the selection.
)
®