6
Battery compartment
7
Fold-out stand
8
ST/SP-button (start/stop)
S-button (seconds)
9
M-button (minutes)
10
Starting for the first time
Open the battery compartment
Insert the supplied batteries with the correct polarity.
Close the battery compartment
Remove the protective film from the display.
Switch on the product at the on and off switch located
on the back of the product (ON).
The entire display will become visible.
A tone sounds when you touch the buttons.
You can enter numeric values of 0 to 99 minutes and/or 0 to
59 seconds.
Stopwatch
You can use your product like a stopwatch.
1. Delete all entries so that 00 00
2. Press the ST/SP-button
stopwatch. While the time measurement is running, M+S
flashes in the display above the seconds.
You can now read the time measured.
3. Press the M-button
delete the time measurement. The display will show 00 00
Cleaning instructions
Improper cleaning can damage the product. Do not immerse the
product in water or other liquids. Avoid any aggressive cleaning
agents, brushes with metal or nylon bristles, or any sharp or
metallic cleaning objects such as knives, hard spatulas and the
like. These can damage the surface. Clean the product with a
soft, dry, lint-free cloth, such as that used for cleaning glasses
lenses.
of the product.
.
- 14 -
00 00 can be seen on the display.
00 00
00 00
, to start, pause or stop the
and the S-button
together to
- 16 -
Quick setting
When setting the numerical values, you can use the quick setting
by pressing and holding the M-button
Operation
Countdown
1. Press the M-button
2. Press the S-button
3. Press the ST/SP-button
countdown. When the countdown is running, M+S flashes in
the display above the seconds.
After the time has elapsed, a signal tone will sound.
4. Press any button to stop the signal tone. If the tone is not
stopped, the signal tone will stop automatically after approx.
30 seconds.
5. Press the M-button
clear your input. The display will show 00 00
Storage
If the product is not used for a long time, remove the batteries,
clean and store the product away from sunlight in a dry, cool
place, preferably in the original packaging.
Disposal
The product and packaging material are recyclable.
Please dispose of them separately for better waste
management. For options for disposing of the used
00 00
00 00.
00 00
product, please contact your town council or city
administration.
Check the labelling on the packaging
material when separating waste – they are marked
with abbreviations (a) and numbers (b) with the
following meaning:
1-7: Plastics
20-22: Paper and cardboard
80-98: Composites
and the S-button
,to set the minutes.
,to set the seconds.
,to start, pause or stop the
and the S-button
together to
00 00.
00 00
00 00
- 15 -
- 17 -
.