Storage - Texas A/S Snow Buster 650E Anleitung

Draining the carburetor

Loosen the carburetor drain screw.

Allow gasoline to drain completely into suitable container.

Retighten drain screw.

STORAGE

Storage preparation
Proper preparation for long term storage is essential for keeping your snow blower free
from rust corrosion and prevent part and function to parts impair. The following steps will
make the engine easier to start after storage and prevent your snow blower from rusting
during long term period.
Cleaning
If the engine has been running, allow it to cool for at least half an hour before cleaning.
Clean all exterior surfaces, seal up any damaged paint, and coat other areas that may
rust with a light film of oil.

Using a garden hose or high-pressure cleaner can force water into the air cleaner
or muffler opening. Water in the air cleaner will soak the air filter, and water that
passes through the air filter or muffler can enter the cylinder, causing damage.

Water contacting a hot engine can cause damage and in worst case crack the
aluminum parts in the engine. If the engine has been running, allow it to cool for
at least half an hour before washing.
Fuel
Gasoline will oxidize and deteriorate in storage. Old gasoline (more than 3 months old)
will cause hard starting, and it leaves gum deposits that clog the fuel system. If the
gasoline in your engine deteriorates during storage, you may need to have the
carburetor and other fuel system components serviced or replaced.
The length of time that gasoline can be left in your fuel tank and carburetor without
causing functional problems will vary with such factors as gasoline blend, your storage
temperatures, and whether the fuel tank is partially or completely filled. The air in a
partially filled fuel tank promotes fuel deterioration. Very warm storage/temperatures
Drain Screw Drain Screw