Safety Hints , Electrical Protection Class; Application Of The Instrument; Initial Inspection; Before Commissioning - Sartorius X6 System Weighing Controller Zusatzinformation

X6 System Weighing Controller
1 S
AFETY HINTS
This instrument was built and tested in accordance with the safety regulations for
measuring and control instrumentation for protection class I (protective earth connection)
according to EN61010 or VDE 0411. The instrument was delivered in safe condition. To
maintain this condition and to ensure safe operation, the operator must follow the hints
and warnings given in this documentation.

Application of the instrument

1.1
PR 5710 is intended exclusively for application in weighing and batching installations and is particularly
suitable for tank and hopper weighing, weighbridges, platform scales, crane weighing, batching systems and as
a weight indicator in intelligent control systems. Product operation, commissioning and maintenance must be
done by well trained and qualified persons who know of the risks and avoid them, or take measures to protect
themselves.
The instrument is state of the art. No warranty is taken that the product is free of errors, especially with
reference to the software and hardware required for operation and supplied by third parties. The manufacturer
does not take any liability for damage caused by incorrect use of this product. Using this product implies
recognition of the above-mentioned regulations.

Initial inspection

1.2
Check the contents of the consignment for completeness and note whether any damage has occurred during
transport. If the content is incomplete or damaged, a claim must be filed with the carrier immediately and the
Sartorius sales or service organization must be informed to permit repair or replacement of the unit.

Before commissioning

1.3
Before commissioning, after storage and transport, the instrument must be inspected
visually to preclude mechanical damage.

1.3.1 Installation

PR 5710 is suitable for 19-inch rack / control panel mounting.
Dimensions for panel cut-out etc. are described in chapter 2.3.
Sartorius
,
ELECTRICAL PROTECTION CLASS
PR 5710 Additional Information
Visual inspection !
3