Weighing Point Selection / Indication - Sartorius X6 System Weighing Controller Zusatzinformation

X6 System Weighing Controller PR 5710 Additional Information
4 W / I
EIGHING POINT SELECTION NDICATION
The key switches between logical WP A and WP B (if assigned) and WP C (if assigned). The corresponding
LEDs are activated, in case of WP C both LEDs (A and B) are activated.
The physical weighing points (e.g. internal ADC) are assigned to logical weighing points (e.g. A, B) in menu:
[Setup]-[Weighingpoints]-[WP X:]-[Assign].
Sartorius 17