Control Panel
Program
Eco 40-60 program is able to clean normally soiled cotton
laundry declared to be washable at 40°C or 60°C , together in
Eco 40-60
the same cycle, and that this program is used to assess the
compliance with the EU ecodesign legislation.
Cotton
Suitable for fabrics such as cotton and linen.
Synthetics
Suitable for synthetic clothing.
Recommended for 2kg or less of machine washable wool
Wool
fabric (it is optimal to use special detergent for wool fabric).
Washing brightly colored clothes for better protection of
20°C
colors.
You can add special laundry programs in the Roborock
APP Program
app to "APP Program" for quick access on the control
panel, with "Intensive" by default.
Recommended for 5kg or less of four-piece bedding,
Bedding
curtains, and other large fabrics.
90°C high-temperature washing, with 60°C healthy washing
Anti-Allergen
by default. Multiple rinses to remove common allergens
such as dust mites and pet dander.
Quick wash for a small amount of lightly-soiled clothes.
Quick
* Recommended for 1kg or less of clothes.
Recommended for separate rinsing or spinning of 10kg or
Rinse+Spin
less of clothes.
Recommended for 10kg or less of clothes that need
Spin
spinning only.
Rinses the drum at high temperature with special
Drum Clean
detergent (as needed). Note: Do not add clothes.
Description
Drying Level Description
The clothes contain a little moisture after drying and are
Iron
ready for ironing.
The clothes are skin-friendly and ready for immediate
Cupboard
wearing after drying.
The clothes are thoroughly dry and can be folded up and
Cupboard Plus
put away after drying.
Operating Procedure
Select Mode
Select Program
Wash+Dry
Wash
Dry
Notes:
• Program parameter settings such as "Delay Start" and "Temp." can only be adjusted after
a program is selected.
• When the machine is running, touch any program icon on the screen, and the drum lamp
will automatically switch on.
Modes
Wash+Dry: Wash, and then dry.
Wash: Wash only, without drying.
Dry: Dry only, without washing.
16
Set Program Parameters
Start Program
(this step can be skipped)