Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Control Panel
1 Power（ ）
Tap to turn the machine on, and tap and hold for 2 seconds to turn the
machine off. The machine will automatically shut down if left inactive for 10
minutes.
2 Start/Pause（ ）
Tap to start/pause a program. Tap during running to unlock the door and
add clothes mid-cycle. When the water level or temperature is too high to
open the door, the Door Lock Lamp will flash, with a beep as well as "Locl - "
and the remaining time displayed alternately on the screen.
3 Spin Speed/Remote Control：
After selecting a program, tap to select the desired spin speed from No Spin/
400/600/800/1000/1200/1400 RPM. Some programs may limit the RPM for
clothing material protection. Tap and hold the "Spin Speed" button for 3
seconds to activate remote control.
4 Rinse ： After selecting a program, tap to select a desired number of
rinses from 1/2/3/4/5.
11
1
14
14
1
temperature from cold(--)/20°C/30°C/40°C/60°C/90°C. Some programs
may limit the water temperature for clothing material protection.
Tap to select a dryness option from Iron/Cupboard/Cupboard Plus, and this
setting defaults to Cupboard/Cupboard Plus.
14
16
5
1
5 Temp.: After selecting a program, tap to select the desired water
6 Delay Start:
After selecting a program, tap to increase the time
after which the program will start by 30 minutes on the display (max
24 hours). Tap the Start/Pause button to confirm the Delay Start, and
the program will start when the schedule time counts down to zero.
Then the time displayed will be switched to the estimated time of the
selected program.
7 Drying Level（
）
8 Auto Dosing（ ）
Tap to enable or disable the dispense of detergent/softener.
Werbung
