Roborock Zeo One Benutzerhandbuch Seite 19

Maintenance
Body and Gasket
(Clean after each use)
1. Wipe the body with a soft
cloth and a detergent
that contains no corrosive
materials.
Drain Pump Filter Element
1. Press to open the drain pump
flap, and pull the emergency
drainpipe to drain the residual
water.
Inlet Valve Filter
(Clean monthly)
1. Turn off the tap and unscrew
the water inlet hose.
2. Wipe the gasket with a soft
cloth, and remove the foreign
objects (if any) from the groove.
(Clean monthly)
2. Rotate anticlockwise to take
the filter element out, and
clean the waste on it.
2. Take the inlet valve filter out
with needle-nose pliers and
rinse it.
Detergent Drawer
1. Press the detergent drawer button
to pull the detergent drawer out.
(Be careful not to break the glass panel)
3. Check for and remove any
foreign objects from the
drain pump.
3. Clean the threaded part of
the inlet valve with a brush.
19
(Clean as needed)
2. Rinse with water, pour off the
residual water, wipe the drawer
. dry, and reinstall it.
4. Put the filter element back
into the drain pump and
tighten it, and close the
drain pump flap.
4. Reconnect the water inlet
hose to the tap and turn on
the tap to check for leakage.