EINHELL TE-IG 1900 DF Originalbetriebsanleitung Seite 28

10. Troubleshooting
Fault
Engine does not
start
Generator has too
little or no
voltage
No gas fl ow
Gas input too high
Anl_TE_IG_1900_DF_D_GB.indb 28 Anl_TE_IG_1900_DF_D_GB.indb 28
GB
Mögliche Ursache
Automatic oil cut-out has not respon-
ded
Spark plug fouled
No fuel
Controller or capacitor defective
Air fi lter dirty
Gas cylinder empty
Gas cylinder valve closed
The safety valve in the equipment has
still not released any gas
Pressure regulator defective
- 28 -
Behebung
Check oil level, top up engine oil
Clean or replace spark plug (electro-
de spacing 0.6 mm)
Refuel / have the petrol cock checked
Contact your dealer
Clean or replace the fi lter
Replace the gas cylinder
Open the valve
Try again to switch on
Replace the pressure regulator
20.12.2023 14:07:45 20.12.2023 14:07:45